Renault Megane 1.9 DCI 120 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Renault Megane 1.9 DCI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 1.9 DCI 120 hp ECU
Renault Megane (2002) 1.9 DCI 120 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 120 to 165 hp (+45 hp, +38%) and torque from 270 to 320 Nm (+50 Nm). ECU — Bosch EDC16C3. Flashing method: OBD or Bench depending on the unit's protection. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Renault Sport is the performance division that builds RS models and the Megane Sport. Renault is a high-volume chip tuning subject in Western Europe, particularly among taxi fleets.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Megane 1.9 DCI 120 hp?
After Stage 1 the power of the Renault Megane 1.9 DCI 120 hp rises from 120 to 165 hp, a gain of 45 hp (+38%). Torque rises from 270 to 320 Nm (+50 Nm).
How does Stage 1 differ from stock on the Renault Megane?
Stage 1 on the Renault Megane 1.9 DCI 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 DCI 120 hp?
Stage 1 on the Renault Megane 1.9 DCI 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Renault Megane 1.9 DCI 120 hp?
Stage 2 on the Renault Megane 1.9 DCI 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Renault Megane 1.9 DCI 120 hp run?
The control unit of the Renault Megane 1.9 DCI 120 hp is the Bosch EDC16C3. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Renault Megane?
Stage 1 on the Renault Megane voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Megane 1.9 DCI 120 hp done?
The full remap cycle for the Renault Megane — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Megane?
The original Renault Megane ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Megane 1.9 DCI 120 hp?
The cost of Stage 1 for the Renault Megane 1.9 DCI 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.