Renault Megane 1.9 DCI 102 hp — Stage 1 file (+28 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Renault Megane 1.9 DCI 102 hp ECU

Renault Megane (2002) 1.9 DCI 102 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 102 to 130 hp (+28 hp, +27%) and torque from 200 to 240 Nm (+40 Nm). The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Renault is the core of the Renault-Nissan-Mitsubishi Alliance (formed in 1999 and expanded in 2016). DPF/SCR with AdBlue is standard on Euro-6 Renault diesels.

Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.

Frequently asked questions

What power gain do you get after chip tuning the Renault Megane 1.9 DCI 102 hp?

After Stage 1 the power of the Renault Megane 1.9 DCI 102 hp rises from 102 to 130 hp, a gain of 28 hp (+27%). Torque rises from 200 to 240 Nm (+40 Nm).

How does Stage 1 differ from stock on the Renault Megane?

Stage 1 on the Renault Megane 1.9 DCI 102 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.

Is a Stage 1 remap safe for the 1.9 DCI 102 hp?

Stage 1 on the Renault Megane 1.9 DCI 102 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Renault Megane 1.9 DCI 102 hp?

Stage 2 on the Renault Megane 1.9 DCI 102 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does Stage 1 void the warranty on the Renault Megane?

Stage 1 on the Renault Megane voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Renault Megane 1.9 DCI 102 hp done?

The full remap cycle for the Renault Megane — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Renault Megane?

The original Renault Megane ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Renault Megane 1.9 DCI 102 hp?

The cost of Stage 1 for the Renault Megane 1.9 DCI 102 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno