Renault Maxity 3.0 DCI 130 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Renault Maxity 3.0 DCI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Maxity 3.0 DCI 130 hp ECU
Renault Maxity (2007) 3.0 DCI 130 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 380 to 450 Nm (+70 Nm). ECU — Bosch EDC17C45. Flashing method: OBD or Bench depending on the unit's protection. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Alpine is Renault's performance sub-brand for the premium segment. Mid-range Renault diesels are a mainstream chip tuning subject across Europe.
On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How much does the power of the Renault Maxity 3.0 DCI 130 hp increase after Stage 1?
After Stage 1 the power of the Renault Maxity 3.0 DCI 130 hp rises from 130 to 160 hp, a gain of 30 hp (+23%). Torque rises from 380 to 450 Nm (+70 Nm).
How does Stage 1 differ from stock on the Renault Maxity?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Maxity with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Maxity 3.0 DCI 130 hp?
A remap of the Renault Maxity 3.0 DCI 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Maxity 3.0 DCI 130 hp?
Stage 2 on the Renault Maxity 3.0 DCI 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Renault Maxity 3.0 DCI 130 hp use?
The Renault Maxity 3.0 DCI 130 hp is fitted with the Bosch EDC17C45 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Maxity remain valid after Stage 1?
After remapping the Renault Maxity, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Maxity?
Reading and writing via OBD takes 25-30 minutes on the Renault Maxity. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Maxity?
Before Stage 1 the original of the Renault Maxity 3.0 DCI 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Maxity 3.0 DCI 130 hp cost?
The remap price for the Renault Maxity 3.0 DCI 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.