Renault Maxity 2.5 DCI 110 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Renault Maxity 2.5 DCI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Maxity 2.5 DCI 110 hp ECU
Renault Maxity (2007) 2.5 DCI 110 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 110 to 160 hp (+50 hp, +45%) and torque from 270 to 340 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC16C36, Denso DIESEL SH705x NIS. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Renault is a French carmaker, founded in 1899. Renault diesel engines are also used in Nissan, Dacia and Mercedes (the Citan/Vito run Renault engines).
On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How many horsepower does the Renault Maxity 2.5 DCI 110 hp reach after a remap?
The Stage 1 gain for the Renault Maxity 2.5 DCI 110 hp is 50 hp (+45%) over the stock 110 hp, for a total of 160 hp. Torque rises from 270 to 340 Nm (+70 Nm).
What is Stage 1 chip tuning for the Renault Maxity?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Maxity with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Maxity 2.5 DCI 110 hp?
A remap of the Renault Maxity 2.5 DCI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Maxity 2.5 DCI 110 hp?
Stage 2 on the Renault Maxity 2.5 DCI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Renault Maxity 2.5 DCI 110 hp built with?
The Renault Maxity 2.5 DCI 110 hp comes with 2 ECU variants: Bosch EDC16C36, Denso DIESEL SH705x NIS. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Renault Maxity remain valid after Stage 1?
After remapping the Renault Maxity, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Maxity?
Reading and writing via OBD takes 25-30 minutes on the Renault Maxity. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Maxity?
Before Stage 1 the original of the Renault Maxity 2.5 DCI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Maxity 2.5 DCI 110 hp cost?
The remap price for the Renault Maxity 2.5 DCI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.