Renault Laguna 2.0 DCI (2002) 150 hp — Stage 1 file (+60 hp)
hp
Stage 1 file for Renault Laguna 2.0 DCI (2002) 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Laguna 2.0 DCI (2002) 150 hp ECU
Renault Laguna (2007) 2.0 DCI (2002) 150 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 150 to 210 hp (+60 hp, +40%) and torque from 340 to 430 Nm (+90 Nm). ECU — Bosch EDC16CP33. Flashing method: OBD or Bench depending on the unit's protection. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Renault is a French carmaker, founded in 1899. Renault diesel engines are also used in Nissan, Dacia and Mercedes (the Citan/Vito run Renault engines).
On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How many horsepower does the Renault Laguna 2.0 DCI (2002) 150 hp reach after a remap?
After Stage 1 the power of the Renault Laguna 2.0 DCI (2002) 150 hp rises from 150 to 210 hp, a gain of 60 hp (+40%). Torque rises from 340 to 430 Nm (+90 Nm).
How does Stage 1 differ from stock on the Renault Laguna?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Laguna with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +60 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Laguna 2.0 DCI (2002) 150 hp?
A remap of the Renault Laguna 2.0 DCI (2002) 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Laguna 2.0 DCI (2002) 150 hp?
Stage 2 on the Renault Laguna 2.0 DCI (2002) 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Renault Laguna 2.0 DCI (2002) 150 hp use?
The Renault Laguna 2.0 DCI (2002) 150 hp is fitted with the Bosch EDC16CP33 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Laguna remain valid after Stage 1?
After remapping the Renault Laguna, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Laguna?
Reading and writing via OBD takes 25-30 minutes on the Renault Laguna. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Laguna?
Before Stage 1 the original of the Renault Laguna 2.0 DCI (2002) 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Laguna 2.0 DCI (2002) 150 hp cost?
The remap price for the Renault Laguna 2.0 DCI (2002) 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.