Renault Kwid 1.0 SCe 67 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Renault Kwid 1.0 SCe 67 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kwid 1.0 SCe 67 hp ECU
Renault Kwid (2015) 1.0 SCe 67 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 67 to 72 hp (+5 hp, +7%) and torque from 91 to 96 Nm (+5 Nm). The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Alpine is Renault's performance sub-brand for the premium segment. TCe is Renault's signature designation for its petrol turbo engines. Low-output Renault petrol engines are naturally aspirated city-segment units; the gain is modest. Renault's petrol range is shared with Nissan and Dacia within the Alliance.
On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How much does the power of the Renault Kwid 1.0 SCe 67 hp increase after Stage 1?
After Stage 1 the power of the Renault Kwid 1.0 SCe 67 hp rises from 67 to 72 hp, a gain of 5 hp (+7%). Torque rises from 91 to 96 Nm (+5 Nm).
How does Stage 1 differ from stock on the Renault Kwid?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Kwid with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Kwid?
Stage 1 on the base Renault Kwid is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Renault Kwid 1.0 SCe 67 hp?
Stage 2 on the Renault Kwid 1.0 SCe 67 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Renault Kwid remain valid after Stage 1?
After remapping the Renault Kwid, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Kwid?
Reading and writing via OBD takes 25-30 minutes on the Renault Kwid. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Kwid?
Before Stage 1 the original of the Renault Kwid 1.0 SCe 67 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Kwid 1.0 SCe 67 hp cost?
The remap price for the Renault Kwid 1.0 SCe 67 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.