Renault Koleos 2.0 DCI 177 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Renault Koleos 2.0 DCI 177 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Koleos 2.0 DCI 177 hp ECU
Renault Koleos (2017) 2.0 DCI 177 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 177 to 207 hp (+30 hp, +17%) and torque from 380 to 440 Nm (+60 Nm). ECU — Bosch EDC17C84. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Renault range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Renault was a pioneer of compact common-rail diesels in Europe.
On older-generation Renault models, Stage 1 is done via OBD without bench. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
What is the Stage 1 effect on the Renault Koleos 2.0 DCI 177 hp?
The Stage 1 gain for the Renault Koleos 2.0 DCI 177 hp is 30 hp (+17%) over the stock 177 hp, for a total of 207 hp. Torque rises from 380 to 440 Nm (+60 Nm).
What is Stage 1 chip tuning for the Renault Koleos?
Stage 1 on the Renault Koleos 2.0 DCI 177 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 DCI 177 hp?
Stage 1 on the Renault Koleos 2.0 DCI 177 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Renault Koleos 2.0 DCI 177 hp?
Stage 2 on the Renault Koleos 2.0 DCI 177 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Renault Koleos 2.0 DCI 177 hp run?
The control unit of the Renault Koleos 2.0 DCI 177 hp is the Bosch EDC17C84. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Renault Koleos?
Stage 1 on the Renault Koleos voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Koleos 2.0 DCI 177 hp done?
The full remap cycle for the Renault Koleos — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Koleos?
The original Renault Koleos ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Koleos 2.0 DCI 177 hp?
The cost of Stage 1 for the Renault Koleos 2.0 DCI 177 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.