Renault Kangoo 1.2 TCE EU6 115 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Kangoo 1.2 TCE EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kangoo 1.2 TCE EU6 115 hp ECU
Renault Kangoo (2013 - II (II)) 1.2 TCE EU6 115 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 190 to 230 Nm (+40 Nm). ECU — Siemens/Continental EMS3155. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
How many horsepower does the Renault Kangoo 1.2 TCE EU6 115 hp reach after a remap?
Stage 1 chip tuning on the Renault Kangoo 1.2 TCE EU6 115 hp boosts engine output by 20 hp: from 115 to 135 hp. Torque rises from 190 to 230 Nm (+40 Nm).
What changes in the Renault Kangoo ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Kangoo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Kangoo 1.2 TCE EU6 115 hp?
A remap of the Renault Kangoo 1.2 TCE EU6 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Kangoo 1.2 TCE EU6 115 hp?
Stage 2 for the Renault Kangoo 1.2 TCE EU6 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Renault Kangoo 1.2 TCE EU6 115 hp use?
The Renault Kangoo 1.2 TCE EU6 115 hp is fitted with the Siemens/Continental EMS3155 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Kangoo remain valid after Stage 1?
After remapping the Renault Kangoo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Kangoo?
Reading and writing via OBD takes 25-30 minutes on the Renault Kangoo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Kangoo?
Before Stage 1 the original of the Renault Kangoo 1.2 TCE EU6 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Kangoo 1.2 TCE EU6 115 hp cost?
The remap price for the Renault Kangoo 1.2 TCE EU6 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.