Renault Kangoo 1.2 TCE EU5 115 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Kangoo 1.2 TCE EU5 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kangoo 1.2 TCE EU5 115 hp ECU
Renault Kangoo (2007 - II) 1.2 TCE EU5 115 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 190 to 230 Nm (+40 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3150, Siemens/Continental EMS3155. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
The Renault range covers compacts, saloons, SUVs, MPVs and commercial vehicles. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On Renault petrol engines, Stage 1 delivers a noticeable gain. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
How much does the power of the Renault Kangoo 1.2 TCE EU5 115 hp increase after Stage 1?
Stage 1 for the Renault Kangoo 1.2 TCE EU5 115 hp adds +20 hp — power increases from 115 to 135 hp (+17%). Torque rises from 190 to 230 Nm (+40 Nm).
What does a Stage 1 remap of the Renault Kangoo 1.2 TCE EU5 115 hp include?
Stage 1 chip tuning of the Renault Kangoo is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +20 hp with no hardware changes.
Can you do Stage 1 on the Renault Kangoo 1.2 TCE EU5 115 hp?
Yes, Stage 1 for the Renault Kangoo 1.2 TCE EU5 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Renault Kangoo?
Stage 2 for the Renault Kangoo 1.2 TCE EU5 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Renault Kangoo 1.2 TCE EU5 115 hp?
The Renault Kangoo 1.2 TCE EU5 115 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental EMS3150, Siemens/Continental EMS3155. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Renault Kangoo warranty after chip tuning?
The factory warranty of the Renault Kangoo does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Renault Kangoo take?
On the Renault Kangoo 1.2 TCE EU5 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Renault Kangoo?
Yes, the original ECU firmware of the Renault Kangoo 1.2 TCE EU5 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Renault Kangoo?
Stage 1 for the Renault Kangoo 1.2 TCE EU5 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.