Renault Kangoo Z.E / E Q90 88 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Renault Kangoo Z.E / E Q90 88 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kangoo Z.E / E Q90 88 hp ECU
Renault Kangoo Z.E / E (2017) Q90 88 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 88 to 98 hp (+10 hp, +11%) and torque from 220 to 240 Nm (+20 Nm). The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines.
On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Kangoo Z.E / E Q90 88 hp?
The Stage 1 gain for the Renault Kangoo Z.E / E Q90 88 hp is 10 hp (+11%) over the stock 88 hp, for a total of 98 hp. Torque rises from 220 to 240 Nm (+20 Nm).
What is Stage 1 chip tuning for the Renault Kangoo Z.E / E?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Kangoo Z.E / E with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Kangoo Z.E / E?
Stage 1 on the base Renault Kangoo Z.E / E is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Renault Kangoo Z.E / E Q90 88 hp?
Stage 2 on the Renault Kangoo Z.E / E Q90 88 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Renault Kangoo Z.E / E remain valid after Stage 1?
After remapping the Renault Kangoo Z.E / E, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Kangoo Z.E / E?
Reading and writing via OBD takes 25-30 minutes on the Renault Kangoo Z.E / E. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Kangoo Z.E / E?
Before Stage 1 the original of the Renault Kangoo Z.E / E Q90 88 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Kangoo Z.E / E Q90 88 hp cost?
The remap price for the Renault Kangoo Z.E / E Q90 88 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.