Renault Kangoo Z.E / E Q60 60 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Renault Kangoo Z.E / E Q60 60 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kangoo Z.E / E Q60 60 hp ECU
Renault Kangoo Z.E / E (2017) Q60 60 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 60 to 70 hp (+10 hp, +17%) and torque from 225 to 245 Nm (+20 Nm). The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Renault is the core of the Renault-Nissan-Mitsubishi Alliance (formed in 1999 and expanded in 2016). Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Renault Kangoo Z.E / E Q60 60 hp reach after a remap?
The Stage 1 gain for the Renault Kangoo Z.E / E Q60 60 hp is 10 hp (+17%) over the stock 60 hp, for a total of 70 hp. Torque rises from 225 to 245 Nm (+20 Nm).
What is Stage 1 chip tuning for the Renault Kangoo Z.E / E?
Stage 1 on the Renault Kangoo Z.E / E Q60 60 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +10 hp with no hardware changes.
Is Stage 1 safe for the low-output Renault Kangoo Z.E / E Q60 60 hp?
Stage 1 on the base Renault Kangoo Z.E / E is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Renault Kangoo Z.E / E Q60 60 hp?
Stage 2 on the Renault Kangoo Z.E / E Q60 60 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Renault Kangoo Z.E / E?
Stage 1 on the Renault Kangoo Z.E / E voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Kangoo Z.E / E Q60 60 hp done?
The full remap cycle for the Renault Kangoo Z.E / E — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Kangoo Z.E / E?
The original Renault Kangoo Z.E / E ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Kangoo Z.E / E Q60 60 hp?
The cost of Stage 1 for the Renault Kangoo Z.E / E Q60 60 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.