Renault Fluence 1.5 DCI EU6 95 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Renault Fluence 1.5 DCI EU6 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Fluence 1.5 DCI EU6 95 hp ECU
Renault Fluence (2009) 1.5 DCI EU6 95 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 95 to 140 hp (+45 hp, +47%) and torque from 220 to 300 Nm (+80 Nm). The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Renault Sport is the performance division that builds RS models and the Megane Sport. Renault is a high-volume chip tuning subject in Western Europe, particularly among taxi fleets.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How much does the power of the Renault Fluence 1.5 DCI EU6 95 hp increase after Stage 1?
After Stage 1 the power of the Renault Fluence 1.5 DCI EU6 95 hp rises from 95 to 140 hp, a gain of 45 hp (+47%). Torque rises from 220 to 300 Nm (+80 Nm).
How does Stage 1 differ from stock on the Renault Fluence?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Fluence with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Fluence?
Stage 1 on the base Renault Fluence is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Renault Fluence 1.5 DCI EU6 95 hp?
Stage 2 on the Renault Fluence 1.5 DCI EU6 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Renault Fluence remain valid after Stage 1?
After remapping the Renault Fluence, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Fluence?
Reading and writing via OBD takes 25-30 minutes on the Renault Fluence. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Fluence?
Before Stage 1 the original of the Renault Fluence 1.5 DCI EU6 95 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Fluence 1.5 DCI EU6 95 hp cost?
The remap price for the Renault Fluence 1.5 DCI EU6 95 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.