Renault Fluence 1.5 DCI EU5 110 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Fluence 1.5 DCI EU5 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Fluence 1.5 DCI EU5 110 hp ECU
Renault Fluence (2009) 1.5 DCI EU5 110 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 110 to 130 hp (+20 hp, +18%) and torque from 240 to 300 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental SID301, Siemens/Continental SID305/6, Siemens/Continental SID306, Siemens/Continental SID307, Siemens/Continental SID305. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). dCi is Renault's signature designation for its turbo diesels.
On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
How much does the power of the Renault Fluence 1.5 DCI EU5 110 hp increase after Stage 1?
Stage 1 for the Renault Fluence 1.5 DCI EU5 110 hp adds +20 hp — power increases from 110 to 130 hp (+18%). Torque rises from 240 to 300 Nm (+60 Nm).
What does a Stage 1 remap of the Renault Fluence 1.5 DCI EU5 110 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Fluence with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Fluence 1.5 DCI EU5 110 hp?
A remap of the Renault Fluence 1.5 DCI EU5 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Fluence 1.5 DCI EU5 110 hp?
Stage 2 for the Renault Fluence 1.5 DCI EU5 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Renault Fluence 1.5 DCI EU5 110 hp built with?
The Renault Fluence 1.5 DCI EU5 110 hp comes with 5 ECU variants: Siemens/Continental SID301, Siemens/Continental SID305/6, Siemens/Continental SID306, Siemens/Continental SID307, Siemens/Continental SID305. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Renault Fluence remain valid after Stage 1?
After remapping the Renault Fluence, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Fluence?
Reading and writing via OBD takes 25-30 minutes on the Renault Fluence. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Fluence?
Before Stage 1 the original of the Renault Fluence 1.5 DCI EU5 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Fluence 1.5 DCI EU5 110 hp cost?
The remap price for the Renault Fluence 1.5 DCI EU5 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.