Renault Espace 2.0 DCI (2002) 150 hp — Stage 1 file (+60 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Renault Espace 2.0 DCI (2002) 150 hp ECU

Renault Espace (2002 - IV) 2.0 DCI (2002) 150 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 150 to 210 hp (+60 hp, +40%) and torque from 340 to 430 Nm (+90 Nm). ECU — Bosch EDC16CP33. Flashing method: OBD or Bench depending on the unit's protection. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Renault is the core of the Renault-Nissan-Mitsubishi Alliance (formed in 1999 and expanded in 2016). DPF/SCR with AdBlue is standard on Euro-6 Renault diesels.

Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.

Frequently asked questions

How much horsepower does Stage 1 add for the Renault Espace 2.0 DCI (2002) 150 hp?

The Stage 1 gain for the Renault Espace 2.0 DCI (2002) 150 hp is 60 hp (+40%) over the stock 150 hp, for a total of 210 hp. Torque rises from 340 to 430 Nm (+90 Nm).

What is Stage 1 chip tuning for the Renault Espace?

Stage 1 on the Renault Espace 2.0 DCI (2002) 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +60 hp with no hardware changes.

Is a Stage 1 remap safe for the 2.0 DCI (2002) 150 hp?

Stage 1 on the Renault Espace 2.0 DCI (2002) 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Renault Espace 2.0 DCI (2002) 150 hp?

Stage 2 on the Renault Espace 2.0 DCI (2002) 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What control unit does the Renault Espace 2.0 DCI (2002) 150 hp run?

The control unit of the Renault Espace 2.0 DCI (2002) 150 hp is the Bosch EDC16CP33. Before flashing, the engineer identifies the exact revision and selects the write method.

Does Stage 1 void the warranty on the Renault Espace?

Stage 1 on the Renault Espace voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Renault Espace 2.0 DCI (2002) 150 hp done?

The full remap cycle for the Renault Espace — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Renault Espace?

The original Renault Espace ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Renault Espace 2.0 DCI (2002) 150 hp?

The cost of Stage 1 for the Renault Espace 2.0 DCI (2002) 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno