Renault Clio 1.0 TCE 90 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Renault Clio 1.0 TCE 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.0 TCE 90 hp ECU
Renault Clio (2023 - V (II)) 1.0 TCE 90 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 90 to 120 hp (+30 hp, +33%) and torque from 160 to 220 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3141, Siemens/Continental EMS3161. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. A 2023 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). Renault's petrol range is shared with Nissan and Dacia within the Alliance. Modern Renault Sport models usually require specialised tooling. Renault Sport RS uses high-output turbo engines for its performance variants.
On modern Renault models, Bench is often needed for the top models. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much does the power of the Renault Clio 1.0 TCE 90 hp increase after Stage 1?
Stage 1 for the Renault Clio 1.0 TCE 90 hp adds +30 hp — power increases from 90 to 120 hp (+33%). Torque rises from 160 to 220 Nm (+60 Nm).
What does a Stage 1 remap of the Renault Clio 1.0 TCE 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Clio with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Clio?
Yes, Stage 1 on the low-output Renault Clio 1.0 TCE 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Renault Clio 1.0 TCE 90 hp?
Stage 2 for the Renault Clio 1.0 TCE 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Renault Clio 1.0 TCE 90 hp built with?
The Renault Clio 1.0 TCE 90 hp comes with 2 ECU variants: Siemens/Continental EMS3141, Siemens/Continental EMS3161. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Renault Clio remain valid after Stage 1?
After remapping the Renault Clio, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Clio?
Reading and writing via OBD takes 25-30 minutes on the Renault Clio. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Clio?
Before Stage 1 the original of the Renault Clio 1.0 TCE 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Clio 1.0 TCE 90 hp cost?
The remap price for the Renault Clio 1.0 TCE 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.