Renault Clio 1.0 SCe 65 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Renault Clio 1.0 SCe 65 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.0 SCe 65 hp ECU
Renault Clio (2023 - V (II)) 1.0 SCe 65 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 65 to 80 hp (+15 hp, +23%) and torque from 95 to 100 Nm (+5 Nm). A 2023 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Renault Sport is the performance division that builds RS models and the Megane Sport. TCe is Renault's signature designation for its petrol turbo engines. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Modern Renault Sport models usually require specialised tooling.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On modern Renault models, Bench is often needed for the top models. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Clio 1.0 SCe 65 hp?
Stage 1 for the Renault Clio 1.0 SCe 65 hp adds +15 hp — power increases from 65 to 80 hp (+23%). Torque rises from 95 to 100 Nm (+5 Nm).
What does a Stage 1 remap of the Renault Clio 1.0 SCe 65 hp include?
Stage 1 on the Renault Clio 1.0 SCe 65 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is Stage 1 safe for the low-output Renault Clio 1.0 SCe 65 hp?
Yes, Stage 1 on the low-output Renault Clio 1.0 SCe 65 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Renault Clio 1.0 SCe 65 hp?
Stage 2 for the Renault Clio 1.0 SCe 65 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Renault Clio?
Stage 1 on the Renault Clio voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Clio 1.0 SCe 65 hp done?
The full remap cycle for the Renault Clio — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Clio?
The original Renault Clio ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Clio 1.0 SCe 65 hp?
The cost of Stage 1 for the Renault Clio 1.0 SCe 65 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.