Renault Clio 1.3 TCE GPF 130 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Renault Clio 1.3 TCE GPF 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.3 TCE GPF 130 hp ECU
Renault Clio (2019 - V) 1.3 TCE GPF 130 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 130 to 165 hp (+35 hp, +27%) and torque from 240 to 300 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3160, Siemens/Continental EMS3161. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
The Renault range covers compacts, saloons, SUVs, MPVs and commercial vehicles. TCe is Renault's signature designation for its petrol turbo engines. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Modern Renault Sport models usually require specialised tooling.
On modern Renault models, Bench is often needed for the top models. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Clio 1.3 TCE GPF 130 hp?
The Stage 1 gain for the Renault Clio 1.3 TCE GPF 130 hp is 35 hp (+27%) over the stock 130 hp, for a total of 165 hp. Torque rises from 240 to 300 Nm (+60 Nm).
What is Stage 1 chip tuning for the Renault Clio?
Stage 1 chip tuning of the Renault Clio is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the Renault Clio 1.3 TCE GPF 130 hp?
Yes, Stage 1 for the Renault Clio 1.3 TCE GPF 130 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Renault Clio?
Stage 2 on the Renault Clio 1.3 TCE GPF 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Renault Clio 1.3 TCE GPF 130 hp?
The Renault Clio 1.3 TCE GPF 130 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental EMS3160, Siemens/Continental EMS3161. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Renault Clio warranty after chip tuning?
The factory warranty of the Renault Clio does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Renault Clio take?
On the Renault Clio 1.3 TCE GPF 130 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Renault Clio?
Yes, the original ECU firmware of the Renault Clio 1.3 TCE GPF 130 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Renault Clio?
Stage 1 for the Renault Clio 1.3 TCE GPF 130 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.