Renault Clio 1.0 TCE 100 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Clio 1.0 TCE 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.0 TCE 100 hp ECU
Renault Clio (2019 - V) 1.0 TCE 100 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 100 to 120 hp (+20 hp, +20%) and torque from 160 to 220 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3140, Siemens/Continental EMS3141. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Dacia is Renault's mass-market budget sub-brand, built in Romania. Modern Renault Sport models usually require specialised tooling. Renault Sport RS uses high-output turbo engines for its performance variants. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. On modern Renault models, Bench is often needed for the top models. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
What is the Stage 1 effect on the Renault Clio 1.0 TCE 100 hp?
After Stage 1 the power of the Renault Clio 1.0 TCE 100 hp rises from 100 to 120 hp, a gain of 20 hp (+20%). Torque rises from 160 to 220 Nm (+60 Nm).
How does Stage 1 differ from stock on the Renault Clio?
Stage 1 on the Renault Clio 1.0 TCE 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.0 TCE 100 hp?
Stage 1 on the Renault Clio 1.0 TCE 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Renault Clio 1.0 TCE 100 hp?
Stage 2 on the Renault Clio 1.0 TCE 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Renault Clio 1.0 TCE 100 hp have?
The Renault Clio 1.0 TCE 100 hp has 2 ECU variants: Siemens/Continental EMS3140, Siemens/Continental EMS3141. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Renault Clio?
Stage 1 on the Renault Clio voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Clio 1.0 TCE 100 hp done?
The full remap cycle for the Renault Clio — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Clio?
The original Renault Clio ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Clio 1.0 TCE 100 hp?
The cost of Stage 1 for the Renault Clio 1.0 TCE 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.