Renault Clio 1.5 DCI EU6 (renault) 75 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Renault Clio 1.5 DCI EU6 (renault) 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.5 DCI EU6 (renault) 75 hp ECU
Renault Clio (2016 - IV (II)) 1.5 DCI EU6 (renault) 75 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 75 to 110 hp (+35 hp, +47%) and torque from 180 to 240 Nm (+60 Nm). ECU — Bosch EDC17C84. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
Renault is a French carmaker, founded in 1899. Renault diesel engines are also used in Nissan, Dacia and Mercedes (the Citan/Vito run Renault engines).
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
What power gain do you get after chip tuning the Renault Clio 1.5 DCI EU6 (renault) 75 hp?
Stage 1 for the Renault Clio 1.5 DCI EU6 (renault) 75 hp adds +35 hp — power increases from 75 to 110 hp (+47%). Torque rises from 180 to 240 Nm (+60 Nm).
What does a Stage 1 remap of the Renault Clio 1.5 DCI EU6 (renault) 75 hp include?
Stage 1 on the Renault Clio 1.5 DCI EU6 (renault) 75 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is Stage 1 safe for the low-output Renault Clio 1.5 DCI EU6 (renault) 75 hp?
Yes, Stage 1 on the low-output Renault Clio 1.5 DCI EU6 (renault) 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Renault Clio 1.5 DCI EU6 (renault) 75 hp?
Stage 2 for the Renault Clio 1.5 DCI EU6 (renault) 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Renault Clio 1.5 DCI EU6 (renault) 75 hp run?
The control unit of the Renault Clio 1.5 DCI EU6 (renault) 75 hp is the Bosch EDC17C84. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Renault Clio?
Stage 1 on the Renault Clio voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Clio 1.5 DCI EU6 (renault) 75 hp done?
The full remap cycle for the Renault Clio — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Clio?
The original Renault Clio ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Clio 1.5 DCI EU6 (renault) 75 hp?
The cost of Stage 1 for the Renault Clio 1.5 DCI EU6 (renault) 75 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.