Renault Clio 0.9 TCE 75 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Renault Clio 0.9 TCE 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 0.9 TCE 75 hp ECU
Renault Clio (2016 - IV (II)) 0.9 TCE 75 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 75 to 105 hp (+30 hp, +40%) and torque from 120 to 165 Nm (+45 Nm). A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Renault is a French carmaker, founded in 1899. Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines. Low-output Renault petrol engines are naturally aspirated city-segment units; the gain is modest.
On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much does the power of the Renault Clio 0.9 TCE 75 hp increase after Stage 1?
Stage 1 chip tuning on the Renault Clio 0.9 TCE 75 hp boosts engine output by 30 hp: from 75 to 105 hp. Torque rises from 120 to 165 Nm (+45 Nm).
What changes in the Renault Clio ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Clio with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Clio?
Yes, Stage 1 on the low-output Renault Clio 0.9 TCE 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Renault Clio 0.9 TCE 75 hp?
Stage 2 for the Renault Clio 0.9 TCE 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Renault Clio remain valid after Stage 1?
After remapping the Renault Clio, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Clio?
Reading and writing via OBD takes 25-30 minutes on the Renault Clio. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Clio?
Before Stage 1 the original of the Renault Clio 0.9 TCE 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Clio 0.9 TCE 75 hp cost?
The remap price for the Renault Clio 0.9 TCE 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.