Renault Clio 1.5 DCI EU5 75 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Renault Clio 1.5 DCI EU5 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.5 DCI EU5 75 hp ECU
Renault Clio (2012 - IV) 1.5 DCI EU5 75 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 75 to 110 hp (+35 hp, +47%) and torque from 180 to 240 Nm (+60 Nm). ECU — Bosch EDC17C42. Flashing method: OBD or Bench depending on the unit's protection. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Alpine is Renault's performance sub-brand for the premium segment. Low-output Renault diesels are city-segment units; Stage 1 is safe.
On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Renault Clio 1.5 DCI EU5 75 hp?
After Stage 1 the power of the Renault Clio 1.5 DCI EU5 75 hp rises from 75 to 110 hp, a gain of 35 hp (+47%). Torque rises from 180 to 240 Nm (+60 Nm).
How does Stage 1 differ from stock on the Renault Clio?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Clio with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Clio?
Stage 1 on the base Renault Clio is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Renault Clio 1.5 DCI EU5 75 hp?
Stage 2 on the Renault Clio 1.5 DCI EU5 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Renault Clio 1.5 DCI EU5 75 hp use?
The Renault Clio 1.5 DCI EU5 75 hp is fitted with the Bosch EDC17C42 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Clio remain valid after Stage 1?
After remapping the Renault Clio, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Clio?
Reading and writing via OBD takes 25-30 minutes on the Renault Clio. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Clio?
Before Stage 1 the original of the Renault Clio 1.5 DCI EU5 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Clio 1.5 DCI EU5 75 hp cost?
The remap price for the Renault Clio 1.5 DCI EU5 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.