Renault Clio 1.2i 16v (2012) 75 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Renault Clio 1.2i 16v (2012) 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.2i 16v (2012) 75 hp ECU
Renault Clio (2012 - IV) 1.2i 16v (2012) 75 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 75 to 83 hp (+8 hp, +11%) and torque from 107 to 120 Nm (+13 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3125, Siemens/Continental SIRIUS 32, Valeo V42. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Dacia is Renault's mass-market budget sub-brand, built in Romania. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On older-generation Renault models, Stage 1 is done via OBD without bench. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Renault Clio 1.2i 16v (2012) 75 hp?
The Stage 1 gain for the Renault Clio 1.2i 16v (2012) 75 hp is 8 hp (+11%) over the stock 75 hp, for a total of 83 hp. Torque rises from 107 to 120 Nm (+13 Nm).
What is Stage 1 chip tuning for the Renault Clio?
Stage 1 chip tuning of the Renault Clio is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +8 hp with no hardware changes.
What does chip tuning give on the low-output Renault Clio 1.2i 16v (2012) 75 hp?
Stage 1 on the base Renault Clio is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Renault Clio?
Stage 2 on the Renault Clio 1.2i 16v (2012) 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Renault Clio 1.2i 16v (2012) 75 hp?
The Renault Clio 1.2i 16v (2012) 75 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental EMS3125, Siemens/Continental SIRIUS 32, Valeo V42. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Renault Clio warranty after chip tuning?
The factory warranty of the Renault Clio does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Renault Clio take?
On the Renault Clio 1.2i 16v (2012) 75 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Renault Clio?
Yes, the original ECU firmware of the Renault Clio 1.2i 16v (2012) 75 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Renault Clio?
Stage 1 for the Renault Clio 1.2i 16v (2012) 75 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.