Renault Clio 1.5 DCI EU4 68 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Renault Clio 1.5 DCI EU4 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.5 DCI EU4 68 hp ECU
Renault Clio (2005 - III) 1.5 DCI EU4 68 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 68 to 90 hp (+22 hp, +32%) and torque from 160 to 200 Nm (+40 Nm). ECU — Delphi DCM1.2. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Renault Sport is the performance division that builds RS models and the Megane Sport. Renault is a high-volume chip tuning subject in Western Europe, particularly among taxi fleets.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How much does the power of the Renault Clio 1.5 DCI EU4 68 hp increase after Stage 1?
The Stage 1 gain for the Renault Clio 1.5 DCI EU4 68 hp is 22 hp (+32%) over the stock 68 hp, for a total of 90 hp. Torque rises from 160 to 200 Nm (+40 Nm).
What is Stage 1 chip tuning for the Renault Clio?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Clio with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Clio?
Stage 1 on the base Renault Clio is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Renault Clio 1.5 DCI EU4 68 hp?
Stage 2 on the Renault Clio 1.5 DCI EU4 68 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Renault Clio 1.5 DCI EU4 68 hp use?
The Renault Clio 1.5 DCI EU4 68 hp is fitted with the Delphi DCM1.2 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Clio remain valid after Stage 1?
After remapping the Renault Clio, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Clio?
Reading and writing via OBD takes 25-30 minutes on the Renault Clio. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Clio?
Before Stage 1 the original of the Renault Clio 1.5 DCI EU4 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Clio 1.5 DCI EU4 68 hp cost?
The remap price for the Renault Clio 1.5 DCI EU4 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.