Renault Captur / QM3 1.5 DCI EU6 95 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Renault Captur / QM3 1.5 DCI EU6 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Captur / QM3 1.5 DCI EU6 95 hp ECU
Renault Captur / QM3 (2019 - II) 1.5 DCI EU6 95 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 95 to 140 hp (+45 hp, +47%) and torque from 220 to 300 Nm (+80 Nm). A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). dCi is Renault's signature designation for its turbo diesels.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On modern Renault models, Bench is often needed for the top models. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Renault Captur / QM3 1.5 DCI EU6 95 hp reach after a remap?
After Stage 1 the power of the Renault Captur / QM3 1.5 DCI EU6 95 hp rises from 95 to 140 hp, a gain of 45 hp (+47%). Torque rises from 220 to 300 Nm (+80 Nm).
How does Stage 1 differ from stock on the Renault Captur / QM3?
Stage 1 on the Renault Captur / QM3 1.5 DCI EU6 95 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.
Is Stage 1 safe for the low-output Renault Captur / QM3 1.5 DCI EU6 95 hp?
Stage 1 on the base Renault Captur / QM3 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Renault Captur / QM3 1.5 DCI EU6 95 hp?
Stage 2 on the Renault Captur / QM3 1.5 DCI EU6 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Renault Captur / QM3?
Stage 1 on the Renault Captur / QM3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Captur / QM3 1.5 DCI EU6 95 hp done?
The full remap cycle for the Renault Captur / QM3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Captur / QM3?
The original Renault Captur / QM3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Captur / QM3 1.5 DCI EU6 95 hp?
The cost of Stage 1 for the Renault Captur / QM3 1.5 DCI EU6 95 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.