Renault Captur / QM3 1.0 TCE LPG 100 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Captur / QM3 1.0 TCE LPG 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Captur / QM3 1.0 TCE LPG 100 hp ECU
Renault Captur / QM3 (2019 - II) 1.0 TCE LPG 100 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 100 to 120 hp (+20 hp, +20%) and torque from 160 to 220 Nm (+60 Nm). A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
The Renault range covers compacts, saloons, SUVs, MPVs and commercial vehicles. TCe is Renault's signature designation for its petrol turbo engines. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Modern Renault Sport models usually require specialised tooling.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. On modern Renault models, Bench is often needed for the top models. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Captur / QM3 1.0 TCE LPG 100 hp?
After Stage 1 the power of the Renault Captur / QM3 1.0 TCE LPG 100 hp rises from 100 to 120 hp, a gain of 20 hp (+20%). Torque rises from 160 to 220 Nm (+60 Nm).
How does Stage 1 differ from stock on the Renault Captur / QM3?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Captur / QM3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Captur / QM3 1.0 TCE LPG 100 hp?
A remap of the Renault Captur / QM3 1.0 TCE LPG 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Captur / QM3 1.0 TCE LPG 100 hp?
Stage 2 on the Renault Captur / QM3 1.0 TCE LPG 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Renault Captur / QM3 remain valid after Stage 1?
After remapping the Renault Captur / QM3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Captur / QM3?
Reading and writing via OBD takes 25-30 minutes on the Renault Captur / QM3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Captur / QM3?
Before Stage 1 the original of the Renault Captur / QM3 1.0 TCE LPG 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Captur / QM3 1.0 TCE LPG 100 hp cost?
The remap price for the Renault Captur / QM3 1.0 TCE LPG 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.