Porsche Macan 3.6T Performance 440 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Porsche Macan 3.6T Performance 440 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Macan 3.6T Performance 440 hp ECU
Porsche Macan (2013-) 3.6T Performance 440 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 440 to 460 hp (+20 hp, +5%) and torque from 600 to 660 Nm (+60 Nm). A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
The 911 has been Porsche's iconic model since 1963 and a benchmark sports car. Porsche specialises in sports cars, roadsters and premium SUVs. Porsche has been part of the Volkswagen Group (VAG) since 2012. Mid-generation petrol models use standard OBD flash. The GT3 / GT2 RS form a calibration segment of their own. Top-tier Porsche Turbo engines have significant potential with a downpipe + intake.
With a downpipe + intake, top-tier Porsche Turbo engines comfortably reach Stage 2. Within the VAG group, Porsche shares some ECUs and platforms with Audi. On pre-2017 Porsche models, Stage 1 is done via OBD without bench. Top-tier Porsche engines (Turbo S, GT3, GT2 RS) sit at the brand's power ceiling; the gain is significant. Porsche engines are a proven base once supporting hardware is added. A Bench read is standard procedure on modern top-tier Porsches.
Frequently asked questions
What is the Stage 1 effect on the Porsche Macan 3.6T Performance 440 hp?
Stage 1 for the Porsche Macan 3.6T Performance 440 hp adds +20 hp — power increases from 440 to 460 hp (+5%). Torque rises from 600 to 660 Nm (+60 Nm).
What does a Stage 1 remap of the Porsche Macan 3.6T Performance 440 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Porsche Macan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Does Stage 1 make sense on the Porsche Macan 3.6T Performance 440 hp with this much power?
On the top-spec Porsche Macan 3.6T Performance 440 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Porsche Macan 3.6T Performance 440 hp?
Stage 2 for the Porsche Macan 3.6T Performance 440 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Porsche Macan remain valid after Stage 1?
After remapping the Porsche Macan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Porsche Macan?
Reading and writing via OBD takes 25-30 minutes on the Porsche Macan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Porsche Macan?
Before Stage 1 the original of the Porsche Macan 3.6T Performance 440 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Porsche Macan 3.6T Performance 440 hp cost?
The remap price for the Porsche Macan 3.6T Performance 440 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.