Porsche Macan 3.6T 400 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Porsche Macan 3.6T 400 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Macan 3.6T 400 hp ECU
Porsche Macan (2013-) 3.6T 400 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 400 to 450 hp (+50 hp, +12%) and torque from 550 to 650 Nm (+100 Nm). A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Porsche has been part of the Volkswagen Group (VAG) since 2012. Porsche is a premium sports car manufacturer from Stuttgart-Zuffenhausen, founded in 1931. The Porsche community is one of the most premium in chip tuning. Top-tier Porsche Turbo engines have significant potential with a downpipe + intake. The factory Porsche calibration is sporty, yet there is still headroom for Stage 1. Porsche shares some engines with Audi (top-tier V8s).
On Porsche, Stage 1 is a premium service that more often requires manual validation. With a downpipe + intake, top-tier Porsche Turbo engines comfortably reach Stage 2. Within the VAG group, Porsche shares some ECUs and platforms with Audi. Top-tier Porsche engines (Turbo S, GT3, GT2 RS) sit at the brand's power ceiling; the gain is significant. Porsche engines are a proven base once supporting hardware is added. A Bench read is standard procedure on modern top-tier Porsches.
Frequently asked questions
How much does the power of the Porsche Macan 3.6T 400 hp increase after Stage 1?
Stage 1 chip tuning on the Porsche Macan 3.6T 400 hp boosts engine output by 50 hp: from 400 to 450 hp. Torque rises from 550 to 650 Nm (+100 Nm).
What changes in the Porsche Macan ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Porsche Macan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Does Stage 1 make sense on the Porsche Macan 3.6T 400 hp with this much power?
On the top-spec Porsche Macan 3.6T 400 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Porsche Macan 3.6T 400 hp?
Stage 2 for the Porsche Macan 3.6T 400 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Porsche Macan remain valid after Stage 1?
After remapping the Porsche Macan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Porsche Macan?
Reading and writing via OBD takes 25-30 minutes on the Porsche Macan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Porsche Macan?
Before Stage 1 the original of the Porsche Macan 3.6T 400 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Porsche Macan 3.6T 400 hp cost?
The remap price for the Porsche Macan 3.6T 400 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.