Porsche Macan 2.0 TFSI 252 hp — Stage 1 file (+48 hp)
hp
Stage 1 file for Porsche Macan 2.0 TFSI 252 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Macan 2.0 TFSI 252 hp ECU
Porsche Macan (2013-) 2.0 TFSI 252 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 252 to 300 hp (+48 hp, +19%) and torque from 370 to 440 Nm (+70 Nm). This engine ships with different ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.4, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Temic DL501 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
The 911 has been Porsche's iconic model since 1963 and a benchmark sports car. Porsche specialises in sports cars, roadsters and premium SUVs. Porsche has been part of the Volkswagen Group (VAG) since 2012. The Porsche GT3, GT4 and GT2 RS use naturally aspirated and turbo engines in the track-focused range.
On Porsche performance petrol engines, Stage 1 delivers a noticeable gain even on stock hardware. Within the VAG group, Porsche shares some ECUs and platforms with Audi. On pre-2017 Porsche models, Stage 1 is done via OBD without bench. On the Porsche Turbo, Stage 1 delivers a solid gain even on stock hardware. High-output Porsche models run a high-output platform with solid headroom for Stage 1.
The PDK handles significant torque even in stock form. The PDK TCU requires calibration at Stage 1+. Tiptronic is the classic automatic for Porsche's premium models.
Frequently asked questions
What is the Stage 1 effect on the Porsche Macan 2.0 TFSI 252 hp?
Stage 1 for the Porsche Macan 2.0 TFSI 252 hp adds +48 hp — power increases from 252 to 300 hp (+19%). Torque rises from 370 to 440 Nm (+70 Nm).
What does a Stage 1 remap of the Porsche Macan 2.0 TFSI 252 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Porsche Macan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +48 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Porsche Macan?
Stage 1 on the powerful Porsche Macan 2.0 TFSI 252 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Porsche Macan 2.0 TFSI 252 hp?
Stage 2 for the Porsche Macan 2.0 TFSI 252 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Porsche Macan 2.0 TFSI 252 hp built with?
The Porsche Macan 2.0 TFSI 252 hp comes with 3 ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.4, Siemens/Continental Simos18.6. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DL382, Temic DL501) on the Porsche Macan be calibrated?
The Porsche Macan 2.0 TFSI 252 hp has 2 TCU variants: Temic DL382, Temic DL501. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Porsche Macan remain valid after Stage 1?
After remapping the Porsche Macan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Porsche Macan?
Reading and writing via OBD takes 25-30 minutes on the Porsche Macan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Porsche Macan?
Before Stage 1 the original of the Porsche Macan 2.0 TFSI 252 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Porsche Macan 2.0 TFSI 252 hp cost?
The remap price for the Porsche Macan 2.0 TFSI 252 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.