Porsche Cayenne 4.8 V8 Turbo S 570 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Porsche Cayenne 4.8 V8 Turbo S 570 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Cayenne 4.8 V8 Turbo S 570 hp ECU
Porsche Cayenne (2014 - 958) 4.8 V8 Turbo S 570 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 570 to 600 hp (+30 hp, +5%) and torque from 800 to 820 Nm (+20 Nm). A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
The Porsche Taycan is Porsche's first all-electric sports saloon, built on the J1 platform. The Porsche Turbo and GT models are the brand's top segment, with extreme power output. The 911 has been Porsche's iconic model since 1963 and a benchmark sports car. Turbo is Porsche's signature designation for its top turbocharged models. Porsche's petrol range spans sports cars, roadsters and premium SUVs. Mid-generation petrol models use standard OBD flash.
With a downpipe + intake, top-tier Porsche Turbo engines comfortably reach Stage 2. Within the VAG group, Porsche shares some ECUs and platforms with Audi. On pre-2017 Porsche models, Stage 1 is done via OBD without bench. A Bench read is standard procedure on modern top-tier Porsches. Top-tier Porsche engines (Turbo S, GT3, GT2 RS) sit at the brand's power ceiling; the gain is significant. Porsche engines are a proven base once supporting hardware is added.
Frequently asked questions
What is the Stage 1 effect on the Porsche Cayenne 4.8 V8 Turbo S 570 hp?
Stage 1 chip tuning on the Porsche Cayenne 4.8 V8 Turbo S 570 hp boosts engine output by 30 hp: from 570 to 600 hp. Torque rises from 800 to 820 Nm (+20 Nm).
What changes in the Porsche Cayenne ECU after Stage 1?
Stage 1 on the Porsche Cayenne 4.8 V8 Turbo S 570 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
What does Stage 1 give on the top-spec Porsche Cayenne 4.8 V8 Turbo S 570 hp?
On the top-spec Porsche Cayenne 4.8 V8 Turbo S 570 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Porsche Cayenne 4.8 V8 Turbo S 570 hp?
Stage 2 for the Porsche Cayenne 4.8 V8 Turbo S 570 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Porsche Cayenne?
Stage 1 on the Porsche Cayenne voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Porsche Cayenne 4.8 V8 Turbo S 570 hp done?
The full remap cycle for the Porsche Cayenne — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Porsche Cayenne?
The original Porsche Cayenne ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Porsche Cayenne 4.8 V8 Turbo S 570 hp?
The cost of Stage 1 for the Porsche Cayenne 4.8 V8 Turbo S 570 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.