Porsche Cayenne 4.2 TDI 382 hp — Stage 1 file (+58 hp)
hp
Stage 1 file for Porsche Cayenne 4.2 TDI 382 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Cayenne 4.2 TDI 382 hp ECU
Porsche Cayenne (2014 - 958) 4.2 TDI 382 hp — sports diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 382 to 440 hp (+58 hp, +15%) and torque from 850 to 950 Nm (+100 Nm). In the CHIPOK database: 2 configurations. A diesel built in 2014 — the Tricore ECU era; OBD flash works on most production revisions.
The 911 has been Porsche's iconic model since 1963 and a benchmark sports car. Porsche specialises in sports cars, roadsters and premium SUVs. Porsche has been part of the Volkswagen Group (VAG) since 2012. DPF/SCR with AdBlue is standard on Porsche diesels. Porsche diesels share their engines with Audi and VW within VAG. Following the 2015 dieselgate affair, Porsche dropped diesels from its new models.
On Porsche, Stage 1 is a premium service that more often requires manual validation. With a downpipe + intake, top-tier Porsche Turbo engines comfortably reach Stage 2. Within the VAG group, Porsche shares some ECUs and platforms with Audi. Top-tier Porsche engines (Turbo S, GT3, GT2 RS) sit at the brand's power ceiling; the gain is significant. Porsche engines are a proven base once supporting hardware is added. A Bench read is standard procedure on modern top-tier Porsches.
Frequently asked questions
How much does the power of the Porsche Cayenne 4.2 TDI 382 hp increase after Stage 1?
Stage 1 for the Porsche Cayenne 4.2 TDI 382 hp adds +58 hp — power increases from 382 to 440 hp (+15%). Torque rises from 850 to 950 Nm (+100 Nm).
What does a Stage 1 remap of the Porsche Cayenne 4.2 TDI 382 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Porsche Cayenne with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +58 hp with no hardware changes.
Does Stage 1 make sense on the Porsche Cayenne 4.2 TDI 382 hp with this much power?
On the top-spec Porsche Cayenne 4.2 TDI 382 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Porsche Cayenne 4.2 TDI 382 hp?
Stage 2 for the Porsche Cayenne 4.2 TDI 382 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Porsche Cayenne remain valid after Stage 1?
After remapping the Porsche Cayenne, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Porsche Cayenne?
Reading and writing via OBD takes 25-30 minutes on the Porsche Cayenne. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Porsche Cayenne?
Before Stage 1 the original of the Porsche Cayenne 4.2 TDI 382 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Porsche Cayenne 4.2 TDI 382 hp cost?
The remap price for the Porsche Cayenne 4.2 TDI 382 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.