Porsche Cayenne 3.6i 300 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Porsche Cayenne 3.6i 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Cayenne 3.6i 300 hp ECU
Porsche Cayenne (2014 - 958) 3.6i 300 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 300 to 320 hp (+20 hp, +7%) and torque from 400 to 420 Nm (+20 Nm). In the CHIPOK database: 2 configurations. A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
The Porsche community is one of the most premium in chip tuning. PDK (Porsche Doppelkupplung) is Porsche's own dual-clutch automated gearbox. The Porsche Taycan is Porsche's first all-electric sports saloon, built on the J1 platform. The factory Porsche calibration is sporty, yet there is still headroom for Stage 1.
On pre-2017 Porsche models, Stage 1 is done via OBD without bench. The Porsche community is the premium segment of chip tuning, active across Europe and the US. On Porsche, Stage 1 is a premium service that more often requires manual validation. On the Porsche Turbo, Stage 1 delivers a solid gain even on stock hardware. High-output Porsche models run a high-output platform with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Porsche Cayenne 3.6i 300 hp reach after a remap?
Stage 1 for the Porsche Cayenne 3.6i 300 hp adds +20 hp — power increases from 300 to 320 hp (+7%). Torque rises from 400 to 420 Nm (+20 Nm).
What does a Stage 1 remap of the Porsche Cayenne 3.6i 300 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Porsche Cayenne with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Porsche Cayenne?
Stage 1 on the powerful Porsche Cayenne 3.6i 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Porsche Cayenne 3.6i 300 hp?
Stage 2 for the Porsche Cayenne 3.6i 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Porsche Cayenne remain valid after Stage 1?
After remapping the Porsche Cayenne, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Porsche Cayenne?
Reading and writing via OBD takes 25-30 minutes on the Porsche Cayenne. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Porsche Cayenne?
Before Stage 1 the original of the Porsche Cayenne 3.6i 300 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Porsche Cayenne 3.6i 300 hp cost?
The remap price for the Porsche Cayenne 3.6i 300 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.