Porsche Cayenne 3.6i 300 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Porsche Cayenne 3.6i 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Cayenne 3.6i 300 hp ECU
Porsche Cayenne (2010 - 958) 3.6i 300 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 300 to 320 hp (+20 hp, +7%) and torque from 400 to 420 Nm (+20 Nm). In the CHIPOK database: 2 configurations. A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.
Porsche has been part of the Volkswagen Group (VAG) since 2012. Porsche is a premium sports car manufacturer from Stuttgart-Zuffenhausen, founded in 1931. The Porsche community is one of the most premium in chip tuning. Mid-generation petrol models use standard OBD flash.
On pre-2017 Porsche models, Stage 1 is done via OBD without bench. The Porsche community is the premium segment of chip tuning, active across Europe and the US. On Porsche, Stage 1 is a premium service that more often requires manual validation. On the Porsche Turbo, Stage 1 delivers a solid gain even on stock hardware. High-output Porsche models run a high-output platform with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Porsche Cayenne 3.6i 300 hp reach after a remap?
Stage 1 chip tuning on the Porsche Cayenne 3.6i 300 hp boosts engine output by 20 hp: from 300 to 320 hp. Torque rises from 400 to 420 Nm (+20 Nm).
What changes in the Porsche Cayenne ECU after Stage 1?
Stage 1 on the Porsche Cayenne 3.6i 300 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the powerful Porsche Cayenne 3.6i 300 hp?
Stage 1 on the powerful Porsche Cayenne 3.6i 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Porsche Cayenne 3.6i 300 hp?
Stage 2 for the Porsche Cayenne 3.6i 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Porsche Cayenne?
Stage 1 on the Porsche Cayenne voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Porsche Cayenne 3.6i 300 hp done?
The full remap cycle for the Porsche Cayenne — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Porsche Cayenne?
The original Porsche Cayenne ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Porsche Cayenne 3.6i 300 hp?
The cost of Stage 1 for the Porsche Cayenne 3.6i 300 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.