Porsche Cayenne 3.0 TDI (porsche) 211 hp — Stage 1 file (+89 hp)
hp
Stage 1 file for Porsche Cayenne 3.0 TDI (porsche) 211 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Cayenne 3.0 TDI (porsche) 211 hp ECU
Porsche Cayenne (2010 - 958) 3.0 TDI (porsche) 211 hp — sports diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 211 to 300 hp (+89 hp, +42%) and torque from 550 to 630 Nm (+80 Nm). The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Porsche Turbo and GT models are the brand's top segment, with extreme power output. The 911 has been Porsche's iconic model since 1963 and a benchmark sports car. Porsche specialises in sports cars, roadsters and premium SUVs. High-output Porsche diesels sit in the premium segment, with the emphasis on Nm. Following the 2015 dieselgate affair, Porsche dropped diesels from its new models. DPF/SCR with AdBlue is standard on Porsche diesels.
The Porsche community is the premium segment of chip tuning, active across Europe and the US. On pre-2017 Porsche models, Stage 1 is done via OBD without bench. On Porsche, Stage 1 is a premium service that more often requires manual validation. High-output Porsche models run a high-output platform with solid headroom for Stage 1. On the Porsche Turbo, Stage 1 delivers a solid gain even on stock hardware.
Frequently asked questions
What is the Stage 1 effect on the Porsche Cayenne 3.0 TDI (porsche) 211 hp?
After Stage 1 the power of the Porsche Cayenne 3.0 TDI (porsche) 211 hp rises from 211 to 300 hp, a gain of 89 hp (+42%). Torque rises from 550 to 630 Nm (+80 Nm).
How does Stage 1 differ from stock on the Porsche Cayenne?
Stage 1 is a software optimization of the factory ECU firmware of the Porsche Cayenne with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +89 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Porsche Cayenne?
The high-output Porsche Cayenne 3.0 TDI (porsche) 211 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Porsche Cayenne 3.0 TDI (porsche) 211 hp?
Stage 2 on the Porsche Cayenne 3.0 TDI (porsche) 211 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Porsche Cayenne remain valid after Stage 1?
After remapping the Porsche Cayenne, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Porsche Cayenne?
Reading and writing via OBD takes 25-30 minutes on the Porsche Cayenne. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Porsche Cayenne?
Before Stage 1 the original of the Porsche Cayenne 3.0 TDI (porsche) 211 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Porsche Cayenne 3.0 TDI (porsche) 211 hp cost?
The remap price for the Porsche Cayenne 3.0 TDI (porsche) 211 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.