Porsche Cayenne 3.6 v6 290 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Porsche Cayenne 3.6 v6 290 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche Cayenne 3.6 v6 290 hp ECU
Porsche Cayenne (2007 - 957) 3.6 v6 290 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 290 to 310 hp (+20 hp, +7%) and torque from 385 to 405 Nm (+20 Nm). A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
The 911 has been Porsche's iconic model since 1963 and a benchmark sports car. Porsche specialises in sports cars, roadsters and premium SUVs. Porsche has been part of the Volkswagen Group (VAG) since 2012. The factory Porsche calibration is sporty, yet there is still headroom for Stage 1.
On Porsche performance petrol engines, Stage 1 delivers a noticeable gain even on stock hardware. On Porsche, Stage 1 is a premium service that more often requires manual validation. Within the VAG group, Porsche shares some ECUs and platforms with Audi. On the Porsche Turbo, Stage 1 delivers a solid gain even on stock hardware. High-output Porsche models run a high-output platform with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Porsche Cayenne 3.6 v6 290 hp increase after Stage 1?
Stage 1 for the Porsche Cayenne 3.6 v6 290 hp adds +20 hp — power increases from 290 to 310 hp (+7%). Torque rises from 385 to 405 Nm (+20 Nm).
What does a Stage 1 remap of the Porsche Cayenne 3.6 v6 290 hp include?
Stage 1 on the Porsche Cayenne 3.6 v6 290 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the powerful Porsche Cayenne 3.6 v6 290 hp?
Stage 1 on the powerful Porsche Cayenne 3.6 v6 290 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Porsche Cayenne 3.6 v6 290 hp?
Stage 2 for the Porsche Cayenne 3.6 v6 290 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Porsche Cayenne?
Stage 1 on the Porsche Cayenne voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Porsche Cayenne 3.6 v6 290 hp done?
The full remap cycle for the Porsche Cayenne — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Porsche Cayenne?
The original Porsche Cayenne ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Porsche Cayenne 3.6 v6 290 hp?
The cost of Stage 1 for the Porsche Cayenne 3.6 v6 290 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.