Porsche 996 3.6i Carrera 320 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Porsche 996 3.6i Carrera 320 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Porsche 996 3.6i Carrera 320 hp ECU
Porsche 996 (1999) 3.6i Carrera 320 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1931). Stage 1 chip tuning raises power from 320 to 335 hp (+15 hp, +5%) and torque from 370 to 395 Nm (+25 Nm). The 1999 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Porsche is a premium sports car manufacturer from Stuttgart-Zuffenhausen, founded in 1931. The Porsche community is one of the most premium in chip tuning. PDK (Porsche Doppelkupplung) is Porsche's own dual-clutch automated gearbox. Turbo is Porsche's signature designation for its top turbocharged models.
The Porsche community is the premium segment of chip tuning, active across Europe and the US. On Porsche performance petrol engines, Stage 1 delivers a noticeable gain even on stock hardware. On Porsche, Stage 1 is a premium service that more often requires manual validation. High-output Porsche models run a high-output platform with solid headroom for Stage 1. On the Porsche Turbo, Stage 1 delivers a solid gain even on stock hardware.
Frequently asked questions
What is the Stage 1 effect on the Porsche 996 3.6i Carrera 320 hp?
After Stage 1 the power of the Porsche 996 3.6i Carrera 320 hp rises from 320 to 335 hp, a gain of 15 hp (+5%). Torque rises from 370 to 395 Nm (+25 Nm).
How does Stage 1 differ from stock on the Porsche 996?
Stage 1 on the Porsche 996 3.6i Carrera 320 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
What does Stage 1 give on the powerful Porsche 996 3.6i Carrera 320 hp?
The high-output Porsche 996 3.6i Carrera 320 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Porsche 996 3.6i Carrera 320 hp?
Stage 2 on the Porsche 996 3.6i Carrera 320 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Porsche 996?
Stage 1 on the Porsche 996 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Porsche 996 3.6i Carrera 320 hp done?
The full remap cycle for the Porsche 996 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Porsche 996?
The original Porsche 996 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Porsche 996 3.6i Carrera 320 hp?
The cost of Stage 1 for the Porsche 996 3.6i Carrera 320 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.