Peugeot Rifter 1.2 THP Puretech 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Peugeot Rifter 1.2 THP Puretech 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Rifter 1.2 THP Puretech 110 hp ECU
Peugeot Rifter (2018) 1.2 THP Puretech 110 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 205 to 270 Nm (+65 Nm). This engine ships with different ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. On Peugeot turbo petrol engines, Stage 1 delivers a noticeable gain. PureTech is Peugeot's signature designation for its petrol turbo engines. Peugeot's petrol range is shared with Citroen and Opel within Stellantis.
The Peugeot community in France offers a large pool of Stage files. On Peugeot petrol engines, Stage 1 delivers a noticeable gain. Protection on modern Peugeot models uses Tricore TPROT, so Bench is required. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Peugeot Rifter 1.2 THP Puretech 110 hp reach after a remap?
After Stage 1 the power of the Peugeot Rifter 1.2 THP Puretech 110 hp rises from 110 to 145 hp, a gain of 35 hp (+32%). Torque rises from 205 to 270 Nm (+65 Nm).
How does Stage 1 differ from stock on the Peugeot Rifter?
Stage 1 chip tuning of the Peugeot Rifter is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the Peugeot Rifter 1.2 THP Puretech 110 hp?
Yes, Stage 1 for the Peugeot Rifter 1.2 THP Puretech 110 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Peugeot Rifter?
Stage 2 on the Peugeot Rifter 1.2 THP Puretech 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Peugeot Rifter 1.2 THP Puretech 110 hp?
The Peugeot Rifter 1.2 THP Puretech 110 hp was fitted with different ECUs depending on the year and trim: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Peugeot Rifter warranty after chip tuning?
The factory warranty of the Peugeot Rifter does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Peugeot Rifter take?
On the Peugeot Rifter 1.2 THP Puretech 110 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Peugeot Rifter?
Yes, the original ECU firmware of the Peugeot Rifter 1.2 THP Puretech 110 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Peugeot Rifter?
Stage 1 for the Peugeot Rifter 1.2 THP Puretech 110 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.