Peugeot RCZ 1.6 THP 156 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Peugeot RCZ 1.6 THP 156 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot RCZ 1.6 THP 156 hp ECU
Peugeot RCZ (2010) 1.6 THP 156 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 156 to 190 hp (+34 hp, +22%) and torque from 240 to 300 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MED17.4, Bosch MED17.4.2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.
Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. The Peugeot Sport GTi models are sporty variants powered by turbo engines. PureTech is Peugeot's signature designation for its petrol turbo engines. On Peugeot turbo petrol engines, Stage 1 delivers a noticeable gain.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. On Peugeot petrol engines, Stage 1 delivers a noticeable gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Peugeot RCZ 1.6 THP 156 hp?
Stage 1 chip tuning on the Peugeot RCZ 1.6 THP 156 hp boosts engine output by 34 hp: from 156 to 190 hp. Torque rises from 240 to 300 Nm (+60 Nm).
What changes in the Peugeot RCZ ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot RCZ with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +34 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot RCZ 1.6 THP 156 hp?
A remap of the Peugeot RCZ 1.6 THP 156 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot RCZ 1.6 THP 156 hp?
Stage 2 for the Peugeot RCZ 1.6 THP 156 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Peugeot RCZ 1.6 THP 156 hp built with?
The Peugeot RCZ 1.6 THP 156 hp comes with 2 ECU variants: Bosch MED17.4, Bosch MED17.4.2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot RCZ remain valid after Stage 1?
After remapping the Peugeot RCZ, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot RCZ?
Reading and writing via OBD takes 25-30 minutes on the Peugeot RCZ. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot RCZ?
Before Stage 1 the original of the Peugeot RCZ 1.6 THP 156 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot RCZ 1.6 THP 156 hp cost?
The remap price for the Peugeot RCZ 1.6 THP 156 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.