Peugeot Partner 1.6 HDI 75 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Peugeot Partner 1.6 HDI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Partner 1.6 HDI 75 hp ECU
Peugeot Partner (1996) 1.6 HDI 75 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 75 to 115 hp (+40 hp, +53%) and torque from 150 to 260 Nm (+110 Nm). ECU — Bosch EDC16C34. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 1996 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Peugeot Partner 1.6 HDI 75 hp?
The Stage 1 gain for the Peugeot Partner 1.6 HDI 75 hp is 40 hp (+53%) over the stock 75 hp, for a total of 115 hp. Torque rises from 150 to 260 Nm (+110 Nm).
What is Stage 1 chip tuning for the Peugeot Partner?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot Partner with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Is Stage 1 worth doing on the base Peugeot Partner?
Stage 1 on the base Peugeot Partner is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Peugeot Partner 1.6 HDI 75 hp?
Stage 2 on the Peugeot Partner 1.6 HDI 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Peugeot Partner 1.6 HDI 75 hp use?
The Peugeot Partner 1.6 HDI 75 hp is fitted with the Bosch EDC16C34 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot Partner remain valid after Stage 1?
After remapping the Peugeot Partner, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot Partner?
Reading and writing via OBD takes 25-30 minutes on the Peugeot Partner. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot Partner?
Before Stage 1 the original of the Peugeot Partner 1.6 HDI 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot Partner 1.6 HDI 75 hp cost?
The remap price for the Peugeot Partner 1.6 HDI 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.