Peugeot Expert / Traveller 2.0 HDI 163 hp — Stage 1 file (+27 hp)
hp
Stage 1 file for Peugeot Expert / Traveller 2.0 HDI 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Expert / Traveller 2.0 HDI 163 hp ECU
Peugeot Expert / Traveller (2006) 2.0 HDI 163 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 163 to 190 hp (+27 hp, +17%) and torque from 340 to 400 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM3.4(+), Delphi DCM3.5, Delphi DCM6.2C. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
On Peugeot diesels, Stage 1 delivers a noticeable torque gain. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Peugeot Expert / Traveller 2.0 HDI 163 hp reach after a remap?
The Stage 1 gain for the Peugeot Expert / Traveller 2.0 HDI 163 hp is 27 hp (+17%) over the stock 163 hp, for a total of 190 hp. Torque rises from 340 to 400 Nm (+60 Nm).
What is Stage 1 chip tuning for the Peugeot Expert / Traveller?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot Expert / Traveller with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +27 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot Expert / Traveller 2.0 HDI 163 hp?
A remap of the Peugeot Expert / Traveller 2.0 HDI 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot Expert / Traveller 2.0 HDI 163 hp?
Stage 2 on the Peugeot Expert / Traveller 2.0 HDI 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot Expert / Traveller 2.0 HDI 163 hp built with?
The Peugeot Expert / Traveller 2.0 HDI 163 hp comes with 3 ECU variants: Delphi DCM3.4(+), Delphi DCM3.5, Delphi DCM6.2C. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot Expert / Traveller remain valid after Stage 1?
After remapping the Peugeot Expert / Traveller, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot Expert / Traveller?
Reading and writing via OBD takes 25-30 minutes on the Peugeot Expert / Traveller. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot Expert / Traveller?
Before Stage 1 the original of the Peugeot Expert / Traveller 2.0 HDI 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot Expert / Traveller 2.0 HDI 163 hp cost?
The remap price for the Peugeot Expert / Traveller 2.0 HDI 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.