Peugeot Boxer 2.2 BlueHDI EU6b 165 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Peugeot Boxer 2.2 BlueHDI EU6b 165 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Boxer 2.2 BlueHDI EU6b 165 hp ECU
Peugeot Boxer (2019) 2.2 BlueHDI EU6b 165 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 165 to 195 hp (+30 hp, +18%) and torque from 370 to 430 Nm (+60 Nm). ECU — Delphi DCM7.1B. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. Mid-range Citroen diesels are a mainstream chip tuning subject.
Protection on modern Peugeot models uses Tricore TPROT, so Bench is required. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp?
The Stage 1 gain for the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp is 30 hp (+18%) over the stock 165 hp, for a total of 195 hp. Torque rises from 370 to 430 Nm (+60 Nm).
What is Stage 1 chip tuning for the Peugeot Boxer?
Stage 1 on the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.2 BlueHDI EU6b 165 hp?
Stage 1 on the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp?
Stage 2 on the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp run?
The control unit of the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp is the Delphi DCM7.1B. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Peugeot Boxer?
Stage 1 on the Peugeot Boxer voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp done?
The full remap cycle for the Peugeot Boxer — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot Boxer?
The original Peugeot Boxer ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp?
The cost of Stage 1 for the Peugeot Boxer 2.2 BlueHDI EU6b 165 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.