Peugeot Boxer 2.2 BlueHDI EU6b 140 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for Peugeot Boxer 2.2 BlueHDI EU6b 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Boxer 2.2 BlueHDI EU6b 140 hp ECU
Peugeot Boxer (2019) 2.2 BlueHDI EU6b 140 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 140 to 195 hp (+55 hp, +39%) and torque from 340 to 430 Nm (+90 Nm). This engine ships with different ECU variants: Delphi DCM7.1B, Bosch MG1CS069. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
The Peugeot community in France offers a large pool of Stage files. On Peugeot diesels, Stage 1 delivers a noticeable torque gain. Protection on modern Peugeot models uses Tricore TPROT, so Bench is required. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp?
After Stage 1 the power of the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp rises from 140 to 195 hp, a gain of 55 hp (+39%). Torque rises from 340 to 430 Nm (+90 Nm).
How does Stage 1 differ from stock on the Peugeot Boxer?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot Boxer with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +55 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp?
A remap of the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp?
Stage 2 on the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp built with?
The Peugeot Boxer 2.2 BlueHDI EU6b 140 hp comes with 2 ECU variants: Delphi DCM7.1B, Bosch MG1CS069. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot Boxer remain valid after Stage 1?
After remapping the Peugeot Boxer, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot Boxer?
Reading and writing via OBD takes 25-30 minutes on the Peugeot Boxer. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot Boxer?
Before Stage 1 the original of the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp cost?
The remap price for the Peugeot Boxer 2.2 BlueHDI EU6b 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.