Peugeot Boxer 2.2 HDI 110 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Peugeot Boxer 2.2 HDI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Boxer 2.2 HDI 110 hp ECU
Peugeot Boxer (2014) 2.2 HDI 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 110 to 180 hp (+70 hp, +64%) and torque from 250 to 350 Nm (+100 Nm). This engine ships with different ECU variants: Siemens/Continental SID208, Visteon DCU-102. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
On older-generation Peugeot models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Peugeot Boxer 2.2 HDI 110 hp increase after Stage 1?
The Stage 1 gain for the Peugeot Boxer 2.2 HDI 110 hp is 70 hp (+64%) over the stock 110 hp, for a total of 180 hp. Torque rises from 250 to 350 Nm (+100 Nm).
What is Stage 1 chip tuning for the Peugeot Boxer?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot Boxer with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +70 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot Boxer 2.2 HDI 110 hp?
A remap of the Peugeot Boxer 2.2 HDI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot Boxer 2.2 HDI 110 hp?
Stage 2 on the Peugeot Boxer 2.2 HDI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot Boxer 2.2 HDI 110 hp built with?
The Peugeot Boxer 2.2 HDI 110 hp comes with 2 ECU variants: Siemens/Continental SID208, Visteon DCU-102. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot Boxer remain valid after Stage 1?
After remapping the Peugeot Boxer, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot Boxer?
Reading and writing via OBD takes 25-30 minutes on the Peugeot Boxer. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot Boxer?
Before Stage 1 the original of the Peugeot Boxer 2.2 HDI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot Boxer 2.2 HDI 110 hp cost?
The remap price for the Peugeot Boxer 2.2 HDI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.