Peugeot Boxer 2.0 BlueHDI 130 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Peugeot Boxer 2.0 BlueHDI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Boxer 2.0 BlueHDI 130 hp ECU
Peugeot Boxer (2014) 2.0 BlueHDI 130 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 130 to 200 hp (+70 hp, +54%) and torque from 340 to 400 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM6.2A, Delphi DCM6.2C. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
The Peugeot community in France offers a large pool of Stage files. On Peugeot diesels, Stage 1 delivers a noticeable torque gain. On older-generation Peugeot models, Stage 1 is done via OBD without bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Peugeot Boxer 2.0 BlueHDI 130 hp?
After Stage 1 the power of the Peugeot Boxer 2.0 BlueHDI 130 hp rises from 130 to 200 hp, a gain of 70 hp (+54%). Torque rises from 340 to 400 Nm (+60 Nm).
How does Stage 1 differ from stock on the Peugeot Boxer?
Stage 1 on the Peugeot Boxer 2.0 BlueHDI 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +70 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 BlueHDI 130 hp?
Stage 1 on the Peugeot Boxer 2.0 BlueHDI 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Peugeot Boxer 2.0 BlueHDI 130 hp?
Stage 2 on the Peugeot Boxer 2.0 BlueHDI 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Peugeot Boxer 2.0 BlueHDI 130 hp have?
The Peugeot Boxer 2.0 BlueHDI 130 hp has 2 ECU variants: Delphi DCM6.2A, Delphi DCM6.2C. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Peugeot Boxer?
Stage 1 on the Peugeot Boxer voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot Boxer 2.0 BlueHDI 130 hp done?
The full remap cycle for the Peugeot Boxer — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot Boxer?
The original Peugeot Boxer ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot Boxer 2.0 BlueHDI 130 hp?
The cost of Stage 1 for the Peugeot Boxer 2.0 BlueHDI 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.