Peugeot Boxer 2.2 HDI (2006) 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Peugeot Boxer 2.2 HDI (2006) 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Boxer 2.2 HDI (2006) 150 hp ECU
Peugeot Boxer (2006) 2.2 HDI (2006) 150 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 350 to 420 Nm (+70 Nm). ECU — Siemens/Continental SID208. Flashing method: OBD or Bench depending on the unit's protection. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
On Peugeot diesels, Stage 1 delivers a noticeable torque gain. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Peugeot Boxer 2.2 HDI (2006) 150 hp reach after a remap?
After Stage 1 the power of the Peugeot Boxer 2.2 HDI (2006) 150 hp rises from 150 to 180 hp, a gain of 30 hp (+20%). Torque rises from 350 to 420 Nm (+70 Nm).
How does Stage 1 differ from stock on the Peugeot Boxer?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot Boxer with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot Boxer 2.2 HDI (2006) 150 hp?
A remap of the Peugeot Boxer 2.2 HDI (2006) 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot Boxer 2.2 HDI (2006) 150 hp?
Stage 2 on the Peugeot Boxer 2.2 HDI (2006) 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Peugeot Boxer 2.2 HDI (2006) 150 hp use?
The Peugeot Boxer 2.2 HDI (2006) 150 hp is fitted with the Siemens/Continental SID208 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot Boxer remain valid after Stage 1?
After remapping the Peugeot Boxer, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot Boxer?
Reading and writing via OBD takes 25-30 minutes on the Peugeot Boxer. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot Boxer?
Before Stage 1 the original of the Peugeot Boxer 2.2 HDI (2006) 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot Boxer 2.2 HDI (2006) 150 hp cost?
The remap price for the Peugeot Boxer 2.2 HDI (2006) 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.