Peugeot Bipper 1.4 HDI 68 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Peugeot Bipper 1.4 HDI 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Bipper 1.4 HDI 68 hp ECU
Peugeot Bipper (2009) 1.4 HDI 68 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 68 to 90 hp (+22 hp, +32%) and torque from 160 to 210 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC16C08, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Peugeot Bipper 1.4 HDI 68 hp?
Stage 1 for the Peugeot Bipper 1.4 HDI 68 hp adds +22 hp — power increases from 68 to 90 hp (+32%). Torque rises from 160 to 210 Nm (+50 Nm).
What does a Stage 1 remap of the Peugeot Bipper 1.4 HDI 68 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot Bipper with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
Is Stage 1 worth doing on the base Peugeot Bipper?
Yes, Stage 1 on the low-output Peugeot Bipper 1.4 HDI 68 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Peugeot Bipper 1.4 HDI 68 hp?
Stage 2 for the Peugeot Bipper 1.4 HDI 68 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Peugeot Bipper 1.4 HDI 68 hp built with?
The Peugeot Bipper 1.4 HDI 68 hp comes with 4 ECU variants: Bosch EDC16C08, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot Bipper remain valid after Stage 1?
After remapping the Peugeot Bipper, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot Bipper?
Reading and writing via OBD takes 25-30 minutes on the Peugeot Bipper. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot Bipper?
Before Stage 1 the original of the Peugeot Bipper 1.4 HDI 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot Bipper 1.4 HDI 68 hp cost?
The remap price for the Peugeot Bipper 1.4 HDI 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.