Peugeot Bipper 1.3 HDI 75 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Peugeot Bipper 1.3 HDI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Bipper 1.3 HDI 75 hp ECU
Peugeot Bipper (2009) 1.3 HDI 75 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 75 to 95 hp (+20 hp, +27%) and torque from 190 to 240 Nm (+50 Nm). This engine ships with different ECU variants: Marelli MJD8, Marelli MJD8F2, Marelli MJD8F3, Marelli MJD9DF. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Peugeot Bipper 1.3 HDI 75 hp reach after a remap?
After Stage 1 the power of the Peugeot Bipper 1.3 HDI 75 hp rises from 75 to 95 hp, a gain of 20 hp (+27%). Torque rises from 190 to 240 Nm (+50 Nm).
How does Stage 1 differ from stock on the Peugeot Bipper?
Stage 1 chip tuning of the Peugeot Bipper is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +20 hp with no hardware changes.
What does chip tuning give on the low-output Peugeot Bipper 1.3 HDI 75 hp?
Stage 1 on the base Peugeot Bipper is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Peugeot Bipper?
Stage 2 on the Peugeot Bipper 1.3 HDI 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Peugeot Bipper 1.3 HDI 75 hp?
The Peugeot Bipper 1.3 HDI 75 hp was fitted with different ECUs depending on the year and trim: Marelli MJD8, Marelli MJD8F2, Marelli MJD8F3, Marelli MJD9DF. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Peugeot Bipper warranty after chip tuning?
The factory warranty of the Peugeot Bipper does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Peugeot Bipper take?
On the Peugeot Bipper 1.3 HDI 75 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Peugeot Bipper?
Yes, the original ECU firmware of the Peugeot Bipper 1.3 HDI 75 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Peugeot Bipper?
Stage 1 for the Peugeot Bipper 1.3 HDI 75 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.