Peugeot 508 2.2 HDI 204 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Peugeot 508 2.2 HDI 204 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 508 2.2 HDI 204 hp ECU
Peugeot 508 (2011) 2.2 HDI 204 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 204 to 235 hp (+31 hp, +15%) and torque from 450 to 520 Nm (+70 Nm). ECU — Bosch EDC17CP42. Flashing method: OBD or Bench depending on the unit's protection. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. On older-generation Peugeot models, Stage 1 is done via OBD without bench. The Peugeot community in France offers a large pool of Stage files. High-output Peugeot Sport GTi models sit in the sports segment, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Peugeot 508 2.2 HDI 204 hp reach after a remap?
After Stage 1 the power of the Peugeot 508 2.2 HDI 204 hp rises from 204 to 235 hp, a gain of 31 hp (+15%). Torque rises from 450 to 520 Nm (+70 Nm).
How does Stage 1 differ from stock on the Peugeot 508?
Stage 1 on the Peugeot 508 2.2 HDI 204 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +31 hp with no hardware changes.
What does Stage 1 give on the powerful Peugeot 508 2.2 HDI 204 hp?
The high-output Peugeot 508 2.2 HDI 204 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Peugeot 508 2.2 HDI 204 hp?
Stage 2 on the Peugeot 508 2.2 HDI 204 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Peugeot 508 2.2 HDI 204 hp run?
The control unit of the Peugeot 508 2.2 HDI 204 hp is the Bosch EDC17CP42. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Peugeot 508?
Stage 1 on the Peugeot 508 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot 508 2.2 HDI 204 hp done?
The full remap cycle for the Peugeot 508 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot 508?
The original Peugeot 508 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot 508 2.2 HDI 204 hp?
The cost of Stage 1 for the Peugeot 508 2.2 HDI 204 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.