Peugeot 5008 1.6 THP PureTech GPF 180 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Peugeot 5008 1.6 THP PureTech GPF 180 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 5008 1.6 THP PureTech GPF 180 hp ECU
Peugeot 5008 (2017) 1.6 THP PureTech GPF 180 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 180 to 215 hp (+35 hp, +19%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS042. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. The Peugeot Sport GTi models are sporty variants powered by turbo engines. PureTech is Peugeot's signature designation for its petrol turbo engines.
On older-generation Peugeot models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Peugeot 5008 1.6 THP PureTech GPF 180 hp?
The Stage 1 gain for the Peugeot 5008 1.6 THP PureTech GPF 180 hp is 35 hp (+19%) over the stock 180 hp, for a total of 215 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Peugeot 5008?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 5008 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 5008 1.6 THP PureTech GPF 180 hp?
A remap of the Peugeot 5008 1.6 THP PureTech GPF 180 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 5008 1.6 THP PureTech GPF 180 hp?
Stage 2 on the Peugeot 5008 1.6 THP PureTech GPF 180 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Peugeot 5008 1.6 THP PureTech GPF 180 hp use?
The Peugeot 5008 1.6 THP PureTech GPF 180 hp is fitted with the Bosch MG1CS042 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot 5008 remain valid after Stage 1?
After remapping the Peugeot 5008, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 5008?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 5008. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 5008?
Before Stage 1 the original of the Peugeot 5008 1.6 THP PureTech GPF 180 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 5008 1.6 THP PureTech GPF 180 hp cost?
The remap price for the Peugeot 5008 1.6 THP PureTech GPF 180 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.