Peugeot 5008 1.6 THP 165 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Peugeot 5008 1.6 THP 165 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 5008 1.6 THP 165 hp ECU
Peugeot 5008 (2017) 1.6 THP 165 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 165 to 190 hp (+25 hp, +15%) and torque from 260 to 300 Nm (+40 Nm). This engine ships with different ECU variants: Bosch MED17.4, Bosch MED17.4.2, Bosch MED17.4.4. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. On Peugeot turbo petrol engines, Stage 1 delivers a noticeable gain. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. The Peugeot Sport GTi models are sporty variants powered by turbo engines.
On Peugeot petrol engines, Stage 1 delivers a noticeable gain. On older-generation Peugeot models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Peugeot 5008 1.6 THP 165 hp?
Stage 1 for the Peugeot 5008 1.6 THP 165 hp adds +25 hp — power increases from 165 to 190 hp (+15%). Torque rises from 260 to 300 Nm (+40 Nm).
What does a Stage 1 remap of the Peugeot 5008 1.6 THP 165 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 5008 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 5008 1.6 THP 165 hp?
A remap of the Peugeot 5008 1.6 THP 165 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 5008 1.6 THP 165 hp?
Stage 2 for the Peugeot 5008 1.6 THP 165 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Peugeot 5008 1.6 THP 165 hp built with?
The Peugeot 5008 1.6 THP 165 hp comes with 3 ECU variants: Bosch MED17.4, Bosch MED17.4.2, Bosch MED17.4.4. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot 5008 remain valid after Stage 1?
After remapping the Peugeot 5008, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 5008?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 5008. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 5008?
Before Stage 1 the original of the Peugeot 5008 1.6 THP 165 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 5008 1.6 THP 165 hp cost?
The remap price for the Peugeot 5008 1.6 THP 165 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.