Peugeot 5008 1.5 BlueHDI 130 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Peugeot 5008 1.5 BlueHDI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 5008 1.5 BlueHDI 130 hp ECU
Peugeot 5008 (2017) 1.5 BlueHDI 130 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 130 to 150 hp (+20 hp, +15%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2017 — the Tricore ECU era; OBD flash works on most production revisions.
The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). Mid-range Citroen diesels are a mainstream chip tuning subject.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. On Peugeot diesels, Stage 1 delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How many horsepower does the Peugeot 5008 1.5 BlueHDI 130 hp reach after a remap?
Stage 1 chip tuning on the Peugeot 5008 1.5 BlueHDI 130 hp boosts engine output by 20 hp: from 130 to 150 hp. Torque rises from 300 to 340 Nm (+40 Nm).
What changes in the Peugeot 5008 ECU after Stage 1?
Stage 1 on the Peugeot 5008 1.5 BlueHDI 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 BlueHDI 130 hp?
Stage 1 on the Peugeot 5008 1.5 BlueHDI 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Peugeot 5008 1.5 BlueHDI 130 hp?
Stage 2 for the Peugeot 5008 1.5 BlueHDI 130 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Peugeot 5008 1.5 BlueHDI 130 hp run?
The control unit of the Peugeot 5008 1.5 BlueHDI 130 hp is the Bosch MD1CS003. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Peugeot 5008?
Stage 1 on the Peugeot 5008 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot 5008 1.5 BlueHDI 130 hp done?
The full remap cycle for the Peugeot 5008 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot 5008?
The original Peugeot 5008 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot 5008 1.5 BlueHDI 130 hp?
The cost of Stage 1 for the Peugeot 5008 1.5 BlueHDI 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.